Monoblanco is a bright white, semi lightweight, one coat, weather resistant and breathable render for vertical masonry and concrete walls. MONOBLANCO is a bright white version of MONOREX GF. Colours Monoblanco is a bright white finish Suitable Substrate Masonry and walls conforming to BS 5628-3 and constructed from the following: Ultra-lightweight, lightweight & dense aggregate concrete blocks(1). Bricks. Clay blocks e.g. Porotherm(1) Standard low and normal density lightweight aircrete blocks. Breeze blocks (clinker)(1). Stone/rubble stone. Shuttered concrete(1). Expanded clay insulation blocks(1). Clean, sound, well adhered existing render. Base coats conforming to BS EN 13914-1 PAREX grey weather resistant base coats, e.g. MONOGRIS E, PARMUREX or TRADIREX. Dry-stacked inter-locking modular wall units e.g. Durisol recycled timber blocks. Durisol with MONOREX GM is NHBC approved for single skin external wall construction. For below dpc applications and old substrates in accordance with BS8000 – 4 Code of Practice for Waterproofing, consult Parex. (1) These substrates will require a suction control coat of MICRO GOBETIS 3000 Substrate Primer Micro Gobetis 3000 (Dependent on substrate – see clause (1) above) Coverage Coverage is provided as a guidance only, excludes wastage and will vary subject to substrate conditions and thickness applied. Weatherproofing Scraped Finish Coat @ 15mm = 1.0-1.1 m² per 25kg bag Decorative Coat Scraped Finish on to Sika Base Coat @ 10mm = 1.4-1.6 m² per 25kg bag For additional information refer to the data sheet on Textured Mineral Finishes. Finishes Fine Scraped Spray Textured – from tyrolean style to heavy roughcast effect. Trowel Smoothed Sponge or float smoothed For additional information refer to the data sheet on Textured Mineral Finishes. Packaging Monoblanco Render is supplied in 25kg bags. Technical & Safety Datasheets Please follow link to Parex Monoblanco technical datasheet. Delivery Monoblanco is available for premium delivery.
