Parex Monogris E is a high performance polymer modified, weather resistant, grey base coat and finishing render for vertical external and internal walls. Suitable for equalising suction on mixed substrates and as a bonding base coat on to high or low suction substrates. Suitable as a grey coat finishing render or as a base coat for receiving a Parex decorative finish. e.g. MONOREX GM & MONOREX GF, MONOBLANCO, REVLANE, CRYLANE. Suitable Substrate Masonry and walls constructed from the following: Ultra-lightweight, lightweight & dense aggregate concrete blocks. Bricks. Clay Blocks s e.g. Porotherm Standard low and normal density lightweight aircrete blocks. Breeze blocks (clinker). Stone/rubble stone. Shuttered concrete. Expanded clay insulation blocks Clean, sound, well adhered existing render. Base coats conforming to BS EN 13914-1 PAREX® grey weather resistant base coats, e.g. MONOGRIS E, PARMUREX Dry-stacked inter-locking modular wall units e.g. Durisol recycled timber blocks Below dpc applications and old substrates in accordance with BS8000 – 4 Code of Practice for Waterproofing – consult Sika for guidance. Unsuitable Substrate Mortar or plaster (Gypsum) coated construct Exposed vertical substrates with a backward incline more than 10 º from the vertical – A backward incline may affect water runoff and may have a tendency to hold moisture Painted substrates – Use PARINTER first. Substrate Primer Substrates must be clean, sound, dust free and free of any material which may prevent adhesion. Remove all traces of plaster, paint, etc. Construction of the masonry must comply with BS 8000-3. On low suction e.g. concrete or high suction e.g. Lightweight aircrete or clay blocks, application may also be assisted with a coat of ready-to use MICRO GOBETIS 3000 or enhance the MONOGRIS E with 0.5 L of 751 LANKOLATEX to the mixing water volume for a 25 kg bag of MONOGRIS E. On wet or wet patchy substrates or where different materials have been used it is advisable to apply a key coat made up by exchanging 0.5 L of water for 0.5 L of 751 LANKOLATEX for the mixing volume for a 25 kg bag of MONOGRIS E. Allow the key coat to fully dry a minimum of 48 hours before the application of the next coat. This suggestion will assist against the effect of ‘block ghosting’ and shade variation. TV10 MESH reinforcement mesh may also be required, dependent upon substrate condition and project specification Coverage Approx. 1.7kg per mm / per m2 Approx. 1.25-1.3 m² @ 15mm/25 kg bag floated smooth – Applied on Block & Brick Approx. 1.66-1.75 m² @ 10mm/25 kg bag floated smooth for decorative finish – Applied on base coat renders or concrete Properties Semi-lightweight render suitable for multiple substrates, Excellent adhesion properties, Suitable for Hand or Spray Application. Water Demand : Approx. 5.4-6.3 Ltrs per 25 kg bag Water Absorption – W2 Reaction to fire – A1 Application Temperature – Dry frost free conditions Packaging Parex Monogris E is supplied in 25kg bags. Technical & Safety Datasheets Please follow link to Parex Monogris E technical datasheet. The link to Parex Monogris E safety datasheet is not available. Delivery Parex Monogris E is usually available for premium delivery.
