Description TWPro MB – Cone Top Cowl – 125mm Cone top / open terminals offer the least resistance of all the family of terminals; the open construction allows the maximum exit velocity of the flue gas. Please note only use on systems where a Tee cap and train is installed to allow any water in the system to drain away. Product Information APPLICATION – For use on solid fuel and gas/oil appliances. e.g., woodstoves, gas coal effect fires, oil boiler, gas boiler, and any solid fuel appliances. CONSTRUCTION – Outer skin is made from 304 stainless Steel and is 0.4mm thick. This is then coated in a high temperature Black finish. The Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3. All parts are fully welded. Distance to combustibles is 50mm. APPROVALS – TWPro is HETAS Approved and is CE marked. Designation Number is EN1856-1 T600 N1 W V2 L50040 G50. EN1856-1 T200 P1 W V2 L50040 O20. INSTALLATION – TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band (supplied). Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board). Product Details: Designation: TWPro Black System: Inner Material: 316L Stainless Steel – 0.40mm thick, Outer Material: 304 Stainless Steel – 0.40mm thick – High Temperature Black Coated Fuels: Wood, Oil, Gas, Low sulfur coal Approvals: HETAS / CE Distance to Combustibles: 50mm
