S4Prime CP 50 POLYMER ADDED, SINGLE COMPONENT, PRIMER FOR EXPOSED CONCRETE SURFACES

DescriptionS4Prime CP 50 is a high-performance, cement-based, single-component primer containing polymer additives. It is designed to enhance the bonding between exposed concrete surfaces and plaster mortars. This primer prevents rapid water loss from cement and gypsum-based plasters, increases workability, and extends the working time, making it ideal for both interior and exterior applications.✅ Advantages:Easy and fast to applyProvides high bonding strengthPrevents rapid water loss of cement and gypsum-based plastersIncreases the workability and working time of plastersSuitable for use on horizontal and vertical surfaces�� Application Areas:Indoors and outdoorsOn walls and ceilingsBefore the application of gypsum and cement-based plasters on exposed concrete surfacesBefore ceiling plastering and applications on old surfaces⚙️ Technical Specifications:PropertyValueChemical StructureCement-based, polymer-added powderMixture Ratio8.00–10.00 L water / 25 kg powderDensity~1.5 g/cm³Working Time20 minutesConsumption1.00–1.20 kg/m²Application Temperature 5°C to 30°CReaction to FireA1��️ Application Instructions:Ensure the surface is dry, clean, and solidMix with clean water until a homogeneous mixture is obtainedApply using a sponge rollerFor optimal results, apply two coats where necessaryAllow 2–3 minutes of resting before use and remix for 1–2 minutes⚠️ Warnings:Do not apply in weather conditions below 5°C or above 30°CAvoid application in humid, rainy, or windy conditionsDo not apply on frozen, melting, or surfaces at risk of rain or frost within 24 hours�� Cleaning & Storage:Clean tools with water immediately after useStore in a dry, moisture-free area, unopened, for up to 12 months�� Safety:Wear protective clothing, gloves, and masks during applicationAvoid contact with eyes and skinKeep out of reach of childrenConsult the Safety Data Sheet (SDS) for more details