S4Floor AB 30 SINGLE COMPONENT, FLEXIBLE PVC FLOORING ADHESIVE

DescriptionS4Floor AB 30 is a ready-to-use, acrylic-based, solvent-free adhesive designed for PVC and linoleum floor coverings. It provides a high bonding strength and is ideal for use in residential and commercial environments. This adhesive is especially suitable for floors subjected to heavy pedestrian traffic and is compatible with underfloor heating systems.✅ Advantages:Ready to use and easy to applyProvides long working timeHigh bonding strengthFlexible structureWater-based and solvent-freeSuitable for indoor applicationsResistant to temperature changesCompatible with underfloor heating systems�� Application Areas:IndoorsOn horizontal surfacesResidences, hospitals, educational buildings, markets, shopping mallsOn leveled concrete slabs, prefabricated concrete, and cement-based screed surfacesFor PVC-based homogeneous and heterogeneous floor tiles, linoleum, and rubber-based flooring applications⚙️ Technical Specifications:PropertyValueChemical StructureAcrylic dispersionDensity~1.35 kg/lt (±0.1)Thickening Time20-25 minutesShear Strength (EN 1373)≥ 0.3 N/mm²Peel Strength (EN 1372)≥ 1.0 N/mm²Dimensional Change (EN 1903)≤ 0.2%Working Time~40-60 minutesSet to Traffic24-48 hoursConsumption250-300 g/m² (depending on the tooth size, flooring type, and surface smoothness)��️ Application Instructions:The surface must be dry and free from contaminants such as dust, dirt, and oilsThe adhesive is ready to use; stir before applicationSpread the adhesive evenly using a triangular toothed notched trowelWait for approximately 20-25 minutes before applying the floor covering materialUse a cylindrical roller to ensure good adhesion and eliminate air gaps⚠️ Warnings:Do not apply below 15°C or above 30°CAvoid application in high humidity, wet, or frozen conditionsDo not add water or any other substances externallyDo not exceed the maximum open working time of 35-45 minutesEnsure the underfloor heating is turned off 24 hours before application and turned on 72 hours after�� Cleaning & Storage:Clean equipment with soapy water immediately after useCured material can only be cleaned with thinnerStore in a dry, frost-free environment, unopened, for up to 12 months�� Safety:Wear protective clothing, gloves, and masks during applicationAvoid contact with eyes and skinKeep out of reach of childrenConsult the Safety Data Sheet (SDS) for more details