$81.9
$109.75
DescriptionS4Proof SS 80 is a silica-silicate-based, waterborne, UV-resistant, and colorless liquid that acts as a water repellent and surface protector. It is ideal for use on both absorbent and less absorbent surfaces, such as concrete, brick, marble, granite, plaster, and natural stone. S4Proof SS 80 penetrates deeply into the surface, forming an invisible barrier that repels water while maintaining the breathability of the material. This makes it ideal for exterior applications in areas exposed to climatic conditions like balconies, terraces, and facades, as well as in wet areas like bathrooms and kitchens.✅ Advantages:Ready to use, no mixing requiredPenetrates surfaces effectively and does not form a surface layerTransparent, preserving the original appearance of surfacesDoes not prevent the surface from breathingAlkali and UV-resistant, providing long-lasting protectionWater-repellent, keeping surfaces dry and cleanSafe for use indoors in wet areas such as bathrooms and kitchens due to the absence of solvents�� Application Areas:Exterior and interior useWater-absorbent surfaces with a certain slopeOutdoor areas such as balconies and terracesWet areas such as bathrooms and kitchensAbsorbent and less absorbent surfaces like concrete, brick, aerated concrete, plaster, marble, granite, travertine, and natural stoneRestoration of old or historical buildings for protection against climatic conditionsWater repellency applications for joints of coating materials such as tiles, ceramics, and glass mosaics⚙️ Technical Specifications:PropertyValueChemical StructureSilica-silicate-based, UV-resistant liquidDensity1.05 g/cm³ (±0.1)Consumption150–200 g/m² (depending on the absorbency of the surface)Drying Time24 hoursApplication Temperature 10°C to 35°CPackaging Options20 kg plastic drum, 5 kg plastic drum��️ Application Instructions:Ensure the application surface is dry, clean, and free from dust, dirt, rust, paint, oil, and other contaminants that may reduce adhesion.If the surface is concrete, ensure that the concrete is cured and the moisture content does not exceed 4%.Shake the product well before use.Apply S4Proof SS 80 using a roller, brush, or airless spray machine.For less absorbent surfaces, a single coat is sufficient. For highly absorbent surfaces, apply two coats with a maximum waiting time of 4 hours between coats.Ensure that the material does not spill onto surfaces that should not be treated.⚠️ Warnings:Do not apply in temperatures below 5°C or above 35°C.Avoid application on wet, high-humidity, frozen surfaces, or surfaces at risk of freezing within 24 hours.Ensure that the product is not exposed to rain or excessive moisture during the curing period.�� Cleaning & Storage:Clean equipment with soapy water immediately after use.Store the product in its original, unopened packaging, in a dry environment, protected from frost, between 10°C and 30°C.Shelf life under appropriate storage conditions is 12 months from the date of production.�� Safety:Wear protective clothing, gloves, and masks during application.Avoid eye, mouth, and skin contact. In case of contact, wash the affected area with plenty of water.Keep out of reach of children.Consult the Safety Data Sheet (SDS) for detailed safety precautions.
Waterproofing Materials
