S4Proof CA 63 WHITE CEMENT AND ACRYLIC BASED, TWO-COMPONENT, FULLY ELASTIC, UV RESISTANT, WATERPROOFING MATERIAL

DescriptionS4Proof CA 63 is a high-performance, two-component, white cement and acrylic-based waterproofing material. It is designed to offer excellent crack-bridging properties and flexibility, ensuring long-lasting waterproofing protection for both interior and exterior surfaces. It is resistant to positive water pressure and provides a seamless and jointless waterproofing layer. The product also offers UV resistance and allows the surface to breathe, making it ideal for use on foundations, retaining walls, terraces, balconies, and wet areas such as swimming pools and water tanks.✅ Advantages:Easy to apply and forms a seamless, jointless waterproofing layerProvides excellent crack-bridging properties (≥1.5 mm)Fully elastic, allowing the material to move with the substrateHighly resistant to UV degradation and weatheringWater vapor permeable, allowing the surface to breatheProtects against water infiltration, including from unpressurized groundwaterIdeal for both interior and exterior applications�� Application Areas:Waterproofing of foundations, retaining walls, and basement wallsTerraces, balconies, and wet areas like bathrooms and kitchensWaterproofing under ceramic applications in swimming pools, water tanks, and fountainsWaterproofing for foundation, curtain, and basement wallsProtection against water penetration in concrete structures exposed to external elements⚙️ Technical Specifications:PropertyValueChemical StructureWhite cement-based, polymer-enhanced powder (Component A) and elastomeric resin (Component B)Density (Component A)1.45 g/cm³ (±0.1)Density (Component B)1.08 g/cm³ (±0.1)Pot Life30 minutesMixture Ratio10 kg liquid (B) / 20 kg powder (A)Bond Strength≥ 1.50 N/mm² (EN 1542)Crack Bridging ( 20°C)≥ 1.00 mmCrack Bridging (-20°C)≥ 1.00 mmCapillary Water Absorption≤ 0.10 kg/m²·h0.5 (EN 1062-3)Pressured Water Resistance≥ 5 bar positive (DIN 1048)Full Drying TimeMinimum 48 hoursConsumption3.00-3.50 kg/m² (for 2 mm application thickness)��️ Application Instructions:Ensure the surface is clean, smooth, and free from contaminants like dust, dirt, and oil.Mix Components A and B thoroughly with a low-speed mixer until homogeneous.Apply with a roller, trowel, or airless spray system, ensuring uniform coverage of the surface.Apply at least two coats, with a drying time of 6-12 hours between layers.For large applications, it is recommended to use ExperBrace RM 12 Waterproofing Mesh between coats to enhance reinforcement.⚠️ Warnings:Do not apply in temperatures below 5°C or above 30°C, or during rainy and/or windy weather.Ensure the surface is dry and free from moisture before application.Protect the applied surface from rain, snow, or moisture until completely dry (24-48 hours).�� Cleaning & Storage:Clean tools with water immediately after use. Cured material can only be removed with a solvent.Store in a dry, cool place, protected from frost, between 5°C and 30°C.Shelf life is 12 months when stored in the original packaging under appropriate conditions.�� Safety:Wear appropriate personal protective equipment (PPE), including gloves, goggles, and protective clothing.Avoid contact with skin and eyes. In case of contact, rinse with water immediately and seek medical advice if necessary.Keep out of reach of children.Consult the Safety Data Sheet (SDS) for more detailed safety information.