S4Proof CA 61 CEMENT AND ACRYLIC BASED, TWO-COMPONENT, FULLY ELASTIC, WATERPROOFING MATERIAL

DescriptionS4Proof CA 61 is a cement and acrylic-based, two-component waterproofing material that provides excellent adhesion and flexibility. It is specifically designed to offer superior crack-bridging properties and resistance to both positive and negative water pressure. This product is perfect for use on both horizontal and vertical surfaces, making it suitable for foundations, retaining walls, basements, terraces, and other surfaces exposed to water. It is ideal for waterproofing applications in high-moisture environments, including areas exposed to water pressure, and it ensures long-lasting protection against water penetration and environmental factors.✅ Advantages:Forms a fully elastic, crack-bridging waterproof membraneHigh adhesion and excellent bonding to a variety of surfacesNon-toxic, suitable for use in water tanksFlexible and durable, maintains elasticity over timeWater vapor permeable, allows the concrete to breatheResistant to thermal shocks and environmental conditionsIdeal for both interior and exterior applicationsProtects against the damaging effects of water, including freeze-thaw cycles�� Application Areas:Interior and exterior surfacesHorizontal and vertical applicationsWaterproofing foundations, retaining walls, basements, and curtain wallsWaterproofing terraces, balconies, and other exposed concrete surfacesWaterproofing areas under ceramic or stone coveringsWaterproofing of wet areas such as swimming pools, kitchens, and bathroomsSuitable for use in water tanks, potable water applications⚙️ Technical Specifications:PropertyValueChemical StructureCement-based, polymer-enhanced powder and elastomeric resinDensity1.70 g/cm³ (± 0.1)Pot Life30 minutesMixture Ratio10 kg liquid / 20 kg powderBond Strength≥ 0.5 N/mm² (EN 14891)Crack Bridging ( 20°C)≥ 1.5 mm (EN 14891)Crack Bridging (-20°C)≥ 1.0 mm (EN 14891)Capillary Water Absorption≤ 0.10 kg/m²·h0.5 (EN 1062-3)Pressured Water Resistance ( )≥ 5 bar (DIN 1048)Pressured Water Resistance (-)≥ 2 bar (DIN 1048)Full Drying TimeMinimum 48 hoursMechanical Strength Time3 daysWater Impermeability Time7 daysCoating Time3-6 hours between coatsConsumption3.00-3.50 kg/m² (for 2 mm thickness)��️ Application Instructions:Ensure the surface is clean, smooth, and free from contaminants such as dust, oil, and grease.Mix Component A and Component B with a low-speed mixer until homogeneous (approximately 3 minutes).Allow the mixture to rest for 2-3 minutes before application.Apply the mixture in at least two coats, using a brush, roller, or trowel.Allow 6-12 hours of drying time between each coat.If necessary, use ExperBrace RM 12 Waterproofing Mesh between layers for added reinforcement.⚠️ Warnings:Do not apply in temperatures below 5°C or above 30°C, or during rainy and/or windy conditions.Ensure the surface is dry before application and avoid applying on frozen or high-humidity surfaces.Protect the freshly applied surface from rain, snow, or moisture until completely dry.�� Cleaning & Storage:Clean tools with water immediately after use. Cured material can only be removed with a solvent.Store the product in a dry, cool area, protected from frost, between 5°C and 30°C.Shelf life is 12 months when stored properly in original packaging.�� Safety:Wear protective gloves, goggles, and appropriate clothing during application.Avoid eye and skin contact. In case of contact, rinse immediately with water and seek medical advice if necessary.Keep out of reach of children.Consult the Safety Data Sheet (SDS) for detailed safety instructions.