S4Proof BT 50 MODIFIED BITUMEN-RUBBER BASED, WATERBORNE, SINGLE COMPONENT, ELASTIC LIQUID WATERPROOFING MATERIAL

DescriptionS4Proof BT 50 is a high-performance, waterborne, single-component liquid waterproofing material based on modified bitumen and rubber. Designed for both horizontal and vertical surfaces, it forms a seamless, flexible layer that offers excellent water resistance. It is especially effective in preventing water penetration in foundations, retaining walls, terraces, and balconies. With superior crack-bridging capabilities, it maintains flexibility and protects surfaces exposed to water pressure, rain, snow, and UV degradation.✅ Advantages:High crack-bridging propertiesForms a seamless, jointless waterproofing layerResistant to positive directional water pressureHigh flexibility, maintains elasticityCan be applied on dry and damp surfacesEasy to apply by roller, trowel, or sprayNon-toxic, environmentally friendly, and solvent-freeSuitable for both interior and exterior applications�� Application Areas:Indoors and outdoorsOn horizontal and vertical surfacesWaterproofing for foundations, retaining walls, and basement wallsTerraces, balconies, and external roof surfacesWaterproofing under coating in terrace waterproofing applicationsBonding thermal insulation boards to bituminous membranesWaterproofing of wet floors, such as kitchens, bathrooms, and swimming poolsWaterproofing of external water tanks⚙️ Technical Specifications:PropertyValueChemical StructureBitumen-rubber based, waterborne polymerDensity1.10 (± 0.05) g/cm³Solid Content~62%Crack BridgingCB2 (≥ 2 mm)Water ImpermeabilityClass W2AResistance to RainClass R1Resistance to CompressionClass C2AFire ResponseClass EConsumption1.50 kg/m² (for 1 mm thickness)��️ Application Instructions:Ensure the surface is clean, smooth, and solid, free from dust, dirt, and loose materials.Mix the product thoroughly before use. No additional thinning or mixing is required.Apply with a roller, brush, or airless spray system to achieve full coverage.Apply at least two coats of waterproofing, ensuring a uniform, non-porous layer.Allow the first coat to dry for 4-6 hours before applying the second coat.For large-scale applications, use the ExperBrace RM 12 waterproofing mesh between layers for added reinforcement.⚠️ Warnings:Do not apply in weather conditions below 5°C or above 35°C, or during rainy or windy conditions.Ensure the surface is dry before application and avoid applying on frozen or high humidity surfaces.Protect the freshly applied surface from rain and moisture until fully dry (24-48 hours).�� Cleaning & Storage:Clean tools with soapy water immediately after use. Cured material can be cleaned with a solvent.Store the product in a cool, dry area, away from frost, between 10°C and 30°C.Shelf life is 12 months when stored under recommended conditions.�� Safety:Wear protective gloves, goggles, and appropriate clothing during application.Avoid contact with eyes and skin. Rinse with water in case of contact.Keep out of reach of children.Consult the Safety Data Sheet (SDS) for detailed safety instructions.