S4Cure AC 10 SINGLE COMPONENT, SOLVENT FREE CURING MATERIAL

DescriptionS4Cure AC 10 is a ready-to-use, acrylic-based curing compound formulated to provide effective water retention for newly poured concrete. By forming a thin, transparent, and non-flammable layer, it prevents the rapid evaporation of water from the concrete, thus reducing the risk of shrinkage cracks. It is ideal for use on both horizontal and vertical concrete surfaces in applications such as foundations, roads, bridges, and canals. This curing compound is especially effective in high-temperature, low-humidity environments where moisture evaporation is high.✅ Advantages:Ready to usePrevents wet shrinkage cracksIncreases abrasion resistance of the surfaceWater-repellentNon-flammable, solvent-freeEasy to apply using roller or sprayerEffective in high-evaporation conditions�� Application Areas:Concrete applications in high temperatures, low humidity, and high evaporation conditionsIndoor and outdoor useFoundations, roads, bridges, and canalsConcrete screeds and plaster⚙️ Technical Specifications:PropertyValueChemical StructureAcrylic-based liquidColourWhite (opaque transparent after application)Density~1.05 g/cm³ (±0.1)Drying Time2 hoursConsumption100-200 g/m² (depending on surface condition)Flashing PointN/AApplication Temperature 5°C to 30°C��️ Application Instructions:Ensure the surface is clean and free from loose debris or dust.Apply immediately after removing molds or once the concrete has lost its free surface water.Use a roller or suitable spraying equipment to apply a thin film layer to the surface.Ensure that the surface is fully covered and there is no pooling of the compound.If needed, a second coat can be applied after a waiting period of at least 6 hours.⚠️ Warnings:Do not apply in weather conditions below 5°C or above 30°C.Protect the concrete surface from rain or snow for 2 hours after application.Ensure proper surface preparation before application.�� Cleaning & Storage:Clean equipment with soapy water immediately after use.Store in its original, sealed packaging in a dry area, protected from frost, between 5°C and 25°C.Shelf life is 12 months from the production date under proper storage conditions.�� Safety:Wear protective clothing, gloves, and masks during application.Avoid eye, mouth, and skin contact. In case of contact, wash immediately with plenty of water.Keep out of reach of children.Consult the Safety Data Sheet (SDS) for detailed safety instructions.