DescriptionThe advantages / Product descriptionThe ready-to-use, extrudable joint mortar for the long-lasting closing of masonry joints.AdvantagesThe ready-to-use, sprayable joint mortar means that there is no need to add water or carry out time-consuming pre-mixing work. It enables clean, purposeful work. This means that you avoid dirtying surrounding areas and wasting material.Good adhesion even on slightly damp substrates practically allows for all-weather work and prevents forced interruptions.The structure of the high-quality water-based polymer has been perfectly designed with the visual appearance of the mortar in mind. This ensures a discreet joint and perfect appearance.fischer Repair AC, the ready-to-use, paintable repairing mortar that has a variety of uses. These include renovating masonry, fixing roof tiles, sealing drill holes or general repair work. The practically odour-free mortar can be easily used due to its stable consistency. It provides very good resistance to weather, ageing and UV. The single-component polymer dispersion can be processed at temperatures between 5 °C and 40 °C, and is temperature-resistant between -30 °C and 75 °C. fischer Repair AC can also be reused. When in the cartridge, it is protected against frost at temperatures down to -15 °C.Application and approvalApplicationsRepairing masonry jointsClosing masonry cracksRepairing chipped edgesClosing drill holes in facing masonry during repair workGeneral repair work (e.g. drill holes with cracked edges)For a better reusability, to close opened cartridges with adhesive tapeBuilding materialsConcretePumiceFibre cementGypsumWooden materialsSand-lime brickCeramicsClinker brickMasonryAerated concretePlasterCementBrickYou can find detailed information on building materials in the registration document.Assembly instructionFunctionalityChemical base: 1C polymer dispersionPlasticConsistency: FirmPractically odour-freeSkin formation time: Approx. 10 minutes.Processing temperature: 5 °C to 40 °C (not below 5 °C)Temperature resistance up to -30 °C (fully cured)Weather-proof after approx. 24 hours.Very good resistance to UV, weather and ageingPaintableFrost-protected in the cartridgeFree of silicone, MDI and solventsNot recommended for caulking guns with a transmission ratio of less than 10:1 (e.g. KPM1)Technical dataContents310 mlLanguage on labelENPackagingCartridgeAmount1 pcs.GTIN (EAN-Code)4048962192469
