DescriptionUsageSikaTack® Panel Primer is used to improve adhesion on porous and metal substrates such as aluminum, wood, ceramics, fibre cement and natural stone. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.PackagingCan4×1000 mlProduct DetailsTypical Product DataChemical baseSolvent-based Epoxy solutionColour (CQP001-1)blackSolid content32 %Application temperature5 – 40 °CApplication methodBrush, felt or foam applicatorConsumptiondepending on substrate porosity50 ml/m2Flash-off time ≥ 15 °C< 15 °Cmaximum 10 minutes30 minutes8 hours Shelf life9 months A CQP = Corporate Quality ProcedureA) stored in sealed container in up-right position in a dry place at ≤ 25 °CTechnical Information ApplicationApplication InformationMETHOD OF APPLICATIONSurfaces must be clean, dry and free from grease, oil, dust and contaminants. Adhesion on substrates may be improved by adding and/or combining pre-treatment processes such as scuffing, cleaning and activating prior to the primer application.Primer ApplicationShake the SikaTack® Panel Primer can very thoroughly until mixing ball rattles freely. Continue shaking for another minute and apply a thin but covering coat with a brush, felt or foam applicator. Ideal application and surface temperature is between 15 °C and 25 °C. SikaTack® Panel Primer has to be applied once only. Care must be taken to ensure that this single application gives adequately dense coverage. Consumption and method of application depend on the specific nature of the substrates. Tightly reseal container immediately after each use.
