Parex Parinter is a restoration and bonding mortar for the renovation of old hydraulic cement or lime based renders, whether sound or cracked but not delaminated, including render or masonry that has been painted or has received a thick textured coating system. Only the addition of clean water on site is required. Designed to create a new base coat render suitable for taking a range of decorative finishes, coatings and suitable top coat renders Suitable Substrate Parinter Renovations composition and adhesion properties make it compatible with a large number of non-porous or smooth substrates such as: painted surfaces hydraulic renders concrete Finishes Suitable Parex® finishes that can be applied onto PARINTER RENOVATION: Decorative coatings: CALCILANE BADIGEON, SILICANE PEINTURE. Decorative finishes: CALCIDECO, CALCILISSE, CALCIFIN, SILICANE TALOCHE range of finishes. Decorative renders: MONOREX GM Unsuitable finishes that MUST NOT be applied onto PARINTER due to their higher mechanical strength (they could delaminate): PARMUREX, BLANC DU LITTORAL, if unsure check with the Parex® Technical Department. Usage Renovation Render Peparatory Bonding Coat Coverage These values are provided as guidance only and may vary subject to substrate conditions, thickness applied and system installed. Smooth substrate: 5 – 8 kg/m2 (3.1 – 5.0m2 per 25 kg bag) for 3 to 5 mm thickness. Rough substrate: 8 – 13 kg/m2 (1.7 – 3.1m2 per 25 kg bag) for 5 to 8 mm thickness. Properties Suitable for Hand or Spray Application. Water Demand : Approx. 4.6 to 5.2 L per 25 kg bag Application Temperature – Dry frost free conditions Packaging Parex Parinter Renovations is supplied in 25kg bags. Technical & Safety Datasheets Please follow link to Parex Parinter Renovations technical datasheet. Delivery Parex Parinter Renovations is usually available for premium delivery.
