Ecorend X32 One Coat Base is a cement based basecoat that has been highly polymer modified in order to offer improved adhesion, waterproofing and breathability. Suitable for use on multiple substrates once primed with Ecorend S10 Bonding Primer, this product can be applied in low temperatures by hand or by spray and can be used as a scratch basecoat ready to receive a through coloured render or as a flat finish ready to receive a thin coat render. Suitable Substrate New Concrete Block, Smooth Brick, Rough Brick, Hacked Off Render, Lightweight Block, Existing Render, EPS Insulation Substrate Primer S10 or G10 Coverage Approx. 1.6kg per mm / per m2 Approx. 1.5m2 per bag @ 10mm finish – Depends on Substrate/Suction Approx. 2.5m2 per bag @ 6mm finish – Depends on Substrate/Suction Properties Highly Polymer Modified, Flexible, Excellent Adhesion, Highly Breathable, Suitable for Hand or Spray Application. Water Demand : Approx. 5.5 – 5.75 litres per 25kg bag Application Temperature 3˚C – 25˚C for a minimum of 24 hours Packaging Ecorend X32 is supplied in 25kg bags. Technical & Safety Datasheets Please follow link to Ecorend X32 technical datasheet. Please follow link to Ecorend X32 safety datasheet. Delivery Ecorend X32 is usually available for premium delivery.
